SERVO PLUNGER
TECHNICAL FEATURES
- Possible to install on conventional feeders
- Use of standard plunger chuck
- Use of low inertia brushless motor and digital electronic drive
- Plunger position accuracy < 0,02 mm
- Motion control with electronic cams
- Controlled by integrated or stand-alone system
- Interface with any type of machine electronic control
MECHANICAL FEATURES
- Housing structure in cast iron containing the carriage, the linear guides and the ball-screw in oil bath
- Ball screw with double preloaded ball-bushings for long-life service
- Low inertia brushless motor
- Long-life synchronous belt transmission
MAIN DATA
- Max. Speed 220 cuts/min
- Max. Plunger Stroke 7” (180 mm)
- Min. Plunger Stroke 5 mm
GEAR TYPE REVOLVING TUBE MECHANISM
MECHANICAL FEATURES
- Height adjusting stroke = 130 mm
- Tube supports size: 5”-6”-7”-8”-10”-12”
- Lifting mechanism with 0,5 mm of positioning stroke per revolution
- Tube rotation speed and direction controlled with brushless motor by the machine computer
- Air cooling with fanned or compressed air
- Torque limiting device to prevent damage to the refractory
- Ball bearing or carbon bearing for the tube support
- Manual or servo controlled lifting device